The Cover Project
General Category => The Request Forum => Topic started by: videogametrader on June 24, 2014, 11:16:56 AM
-
Does anyone have scans of Legend for SNES? I have a manual so i can use that cover to make a vertical. But I would like to have the front so i can make a horizontal. Also, does anyone know what font is used on the back of that box?
Thanks
Tom
-
I have near finished US vertical for the game (but with PAL image).
I'll try to finish it today.
If you link me good version ofthe US front I can do that too.
-
Did you ever finish this cover? I am also looking for a vertical of this game.
-
Did you ever finish this cover? I am also looking for a vertical of this game.
i'm out of cover making for short while as my good monitor broke.
I'm buying new 55" or 65" one very soon and my brothers are assembling me new computer also.
I should be up and running better than ever in few weeks.
-
Sorry to necropost in this thread, but how has the progress been going?
Would love to see a cover for Legend, especially that german one that was to be translated (I lost the thread somewhere and now I can't find it anymore), with the EU cover instead of the US.
It is seriously the only cover that's missing from my puny childhood collection.
-
Sorry to necropost in this thread, but how has the progress been going?
Would love to see a cover for Legend, especially that german one that was to be translated (I lost the thread somewhere and now I can't find it anymore), with the EU cover instead of the US.
It is seriously the only cover that's missing from my puny childhood collection.
Actually I saw this request when it was posted (as it was posted) but that account seemed one of those gimme gimme crap spam crap name accounts so I ignored the request. ;D
This request is done proper enough account so I shall respond:
I was doing it but my computer got burned by lightning strike.
I now have better new computer so I'll try to do this tomorrow or following 2 weeks.
-
Sorry to necropost in this thread, but how has the progress been going?
Would love to see a cover for Legend, especially that german one that was to be translated (I lost the thread somewhere and now I can't find it anymore), with the EU cover instead of the US.
It is seriously the only cover that's missing from my puny childhood collection.
Actually I saw this request when it was posted (as it was posted) but that account seemed one of those gimme gimme crap spam crap name accounts so I ignored the request. ;D
This request is done proper enough account so I shall respond:
I was doing it but my computer got burned by lightning strike.
I now have better new computer so I'll try to do this tomorrow or following 2 weeks.
So does this mean you have the raw scan for the SNES Legend? Thanks.
-
Sorry, no raw scan.
I'll just take the German Vertical cover that I have and turn it into English one.
So unfortunately now raws for making Horizontal.
-
Sorry, no raw scan.
I'll just take the German Vertical cover that I have and turn it into English one.
So unfortunately now raws for making Horizontal.
Thanks I'll get one. Thanks.
-
I just bought the box and I will scan it once it is in, anyone is willing to commit in doing a horizontal retail cover once I scan it in 600 DPI? I do want this cover to be as perfect as possible. Thanks.
-
I just got my box and below is the back of the cover:
http://postimg.org/image/7mtzlm4b5/full/
-
Can you post a scan of the front as well?
-
Can you post a scan of the front as well?
Sure, are you going to work on it because last time you mentioned the quality (300 dpi) of the other scan is too low and you stop working on it. Thanks.
-
Does anyone have scans of Legend for SNES? I have a manual so i can use that cover to make a vertical. But I would like to have the front so i can make a horizontal. Also, does anyone know what font is used on the back of that box?
Thanks
Tom
Here you go, I purposely bought the box for this thread, if you can make it in horizontal cover, it would be great appreciated by a lot of people:
FRONT: http://postimg.org/image/gohmfv4vv/full/
BACK: http://postimg.org/image/7mtzlm4b5/full/
-
So Banisher has sent me this as my next cover to do for him..........unless anyone else desperately wants to do it, or has started already, I will make this my next one over the next few days.
Let me know ASAP if anyone wants to/is doing it..........as I will start a little later this evening.
-
Here is WIP version of the US cover With PAL UK front.
Missing:
- Replacing back text with drop shadow version.
- Barcode.
- SNS code.
- Legal text edit.
- Eventually maybe change the front image.
I replaced the back and spine logos with the logo ripped from the front, and adjusted the published logo on the back.
(https://www.mediafire.com/convkey/431f/5pbfazu36e49uz84g.jpg) (http://www.mediafire.com/view/5pbfazu36e49uz8/SNES_-_US_-_Legend_(UK).jpg)
After note:
Oh how noice it's to do covers with computer that does not suck.
I can now finally promise that I can start really making covers (SNES verticals for starters), so let the requests roll in.
-
Arseen, I am working on the NTSC-U horizontal retail right now............front cover first, so do you want that once Im done with it (probably later this evening) so you can incorporate it into your vertical here?
Will save you the time of cleaning it all up and what not.........unless you dont trust me that is! lol, either way, it will be at the very least a good start for you to get this properly NTSC'ised. ;D
Ps: Just realised the game logo is A LOT more elaborate and detailed on the one I have right now, so you might want to cease fire on your one here as I assume it will drive you nuts having a near perfect NTSC-U cover apart from the PAL logo! :o
Obviously, I am cleaning that up too, so you should just be able to lift it straight out and switch it over if you want too.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
-
The US logo seems easy to separate from the background.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
-
And nobody likes shit in the sand!
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
Ohh god, dude, THAT is what I am working to fix right now.............sometimes a scan can be TOO GOOD! lol, just shows every single minute spec of anything and everything.
Ive played with the contrast and applied a couple of different filters to it.........and am now clone stamping the F out of it!!
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
Ohh god, dude, THAT is what I am working to fix right now.............sometimes a scan can be TOO GOOD! lol, just shows every single minute spec of anything and everything.
Ive played with the contrast and applied a couple of different filters to it.........and am now clone stamping the F out of it!!
:D
But be carefull not to blur it.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
Ohh god, dude, THAT is what I am working to fix right now.............sometimes a scan can be TOO GOOD! lol, just shows every single minute spec of anything and everything.
Ive played with the contrast and applied a couple of different filters to it.........and am now clone stamping the F out of it!!
:D
But be carefull not to blur it.
Arseen, is that scan quality good enough? If yes, I will continue to scan the SNES boxes in that quality.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
Ohh god, dude, THAT is what I am working to fix right now.............sometimes a scan can be TOO GOOD! lol, just shows every single minute spec of anything and everything.
Ive played with the contrast and applied a couple of different filters to it.........and am now clone stamping the F out of it!!
:D
But be carefull not to blur it.
Arseen, is that scan quality good enough? If yes, I will continue to scan the SNES boxes in that quality.
Dude, its great..........sure it makes things like minute dust and specs show up a bit more but everything else is so much easier.
Plus (and to reply to Arseen as well), even with some noise reduction filters and a median one too...........there is really no blur at all, its just smoothed out all that "sand" crap.
Doing the text the way I like to do (ie: redrawing over the original fonts to ensure they are PRECISELY retail in that sense) is so much easier with this level of scanning B..........and that was always the longest part of doing this for me as I have never re-typed (with Arial or something) one of these the horizontal retail covers, always used and redrawn the original text.
-
Yes please, so I can make US one too.
However the goal here was and is US cover but with the superior PAL image. ;)
Ohh Ok, I thought you were only using the PAL image due to the lack of a decent one for the NTSC-U..........especially as you mentioned in your post up there you wanted to "eventually maybe change the front".
I assumed you were compromising with the PAL front, not using it purposefully.
No worries, I will post it anyway and you can make a decision.
Thank you.
I plan on changing the front as altough it looks good at quick glance, whern zoomed in a bit you can see sand like pixel shit on it.
Ohh god, dude, THAT is what I am working to fix right now.............sometimes a scan can be TOO GOOD! lol, just shows every single minute spec of anything and everything.
Ive played with the contrast and applied a couple of different filters to it.........and am now clone stamping the F out of it!!
:D
But be carefull not to blur it.
Arseen, is that scan quality good enough? If yes, I will continue to scan the SNES boxes in that quality.
Dude, its great..........sure it makes things like minute dust and specs show up a bit more but everything else is so much easier.
Plus (and to reply to Arseen as well), even with some noise reduction filters and a median one too...........there is really no blur at all, its just smoothed out all that "sand" crap.
Doing the text the way I like to do (ie: redrawing over the original fonts to ensure they are PRECISELY retail in that sense) is so much easier with this level of scanning B..........and that was always the longest part of doing this for me as I have never re-typed (with Arial or something) one of these the horizontal retail covers, always used and redrawn the original text.
Awesome, I will continue to buy more rare boxes and scan it this way. Thanks.
-
Awesome, I will continue to buy more rare boxes and scan it this way. Thanks.
Which reminds me...........any movement with The Great Battle V?
Ohh and I need to make a request thread for Star Soldier Vanishing Earth NTSC-J N64........as I have searched high and low for anything approaching decent images for that and cannot diddly squat.
-
Awesome, I will continue to buy more rare boxes and scan it this way. Thanks.
Which reminds me...........any movement with The Great Battle V?
Ohh and I need to make a request thread for Star Soldier Vanishing Earth NTSC-J N64........as I have searched high and low for anything approaching decent images for that and cannot diddly squat.
That scan is coming again as last time, we broke the bargain for shipping. Sorry.
-
Awesome, I will continue to buy more rare boxes and scan it this way. Thanks.
Which reminds me...........any movement with The Great Battle V?
Ohh and I need to make a request thread for Star Soldier Vanishing Earth NTSC-J N64........as I have searched high and low for anything approaching decent images for that and cannot diddly squat.
That scan is coming again as last time, we broke the bargain for shipping. Sorry.
Not sure what you mean? you had to buy it AGAIN!!?? that would be the 3rd one right?
But then your post reads like you "broke" the......disagreement? over shipping?
Dont apologise man, none of this has been your fault! just a crazy streak of bad luck.
By the way, I havent quite finished the front of Legend and I am lagging badly here tiredness wise.......so going to bed and will hopefully finish it tomorrow.
-
Awesome, I will continue to buy more rare boxes and scan it this way. Thanks.
Which reminds me...........any movement with The Great Battle V?
Ohh and I need to make a request thread for Star Soldier Vanishing Earth NTSC-J N64........as I have searched high and low for anything approaching decent images for that and cannot diddly squat.
That scan is coming again as last time, we broke the bargain for shipping. Sorry.
Not sure what you mean? you had to buy it AGAIN!!?? that would be the 3rd one right?
But then your post reads like you "broke" the......disagreement? over shipping?
Dont apologise man, none of this has been your fault! just a crazy streak of bad luck.
By the way, I havent quite finished the front of Legend and I am lagging badly here tiredness wise.......so going to bed and will hopefully finish it tomorrow.
Take your time.
-
Arseen, is that scan quality good enough? If yes, I will continue to scan the SNES boxes in that quality.
Might and magic is good, but Legensd was too smalll DPI.
Thank you.
-
Arseen, is that scan quality good enough? If yes, I will continue to scan the SNES boxes in that quality.
Might and magic is good, but Legensd was too smalll DPI.
Thank you.
Holy crap!!........I just realised that the DPI of the Legend scans is 72!!! :o
Im really confused, as to me it looks amazing and far better than even some 300dpi scans I have worked from.........it certainly is easier to work with right now, especially text's.
I think we should try and always work with JPEG files now, as obviously they display the DPI very easily in properties........but PNG's do not (which I completely forgot about).
Banisher - you have sent me many scans of course, a lot of the recent ones were 600dpi which is of course perfect. Super Batter Up and various others have been that, and I assumed Legend was the same (despite being a PNG instead of a JPEG like the others were) as it looks so good.
-
You could tell it from the size of the image, and paint tells the DPI.
-
You could tell it from the size of the image, and paint tells the DPI.
Ahh, you have inadvertently answered a question I was going to ask........as I could not find any answers to googling "how to determine the DPI of a png" until you said that!
So thanks man, still find it weird though that the resolution is THAT low (96dpi) and yet I am finding it fine to work with.
Ohh well, once Ive cleaned it all up it will be 300dpi in the final image.
-
(https://www.mediafire.com/convkey/520c/trejondb6ym9qkl7g.jpg) (https://www.mediafire.com/view/?trejondb6ym9qkl)
Good enough Drop Shadow?
Good enough cover?
-
If anybody needs me to rescan it, please let me know. Thanks.
-
The only thing I don't like is the grey outline/shadow on the logo spine/rear. Try it with black, or outer glow in a dark colour rather than grey drop shadow.
-
The only thing I don't like is the grey outline/shadow on the logo spine/rear. Try it with black, or outer glow in a dark colour rather than grey drop shadow.
You mean the sword?
That is not actually added after dropshadow but part of the logo.
I ripped and cleaned the logo from the front cover.
You can see it if you look carefully at the front logo.
EDIT: After looking it more closely the is excess halo around the shadow of the logo... but I like it.
I can try making alternate with shadow halo removed.
-
Hows this?
(https://www.mediafire.com/convkey/c2c0/qufdyhfa6bigd7o6g.jpg) (https://www.mediafire.com/download/?qufdyhfa6bigd7o)
-
Much better ;D
-
Much better ;D
Oukkeli doukkeli.
I won't submit (just add it... ;)) it yet, as I'm not quite happy with it yet.
Legal text, drop shadow, dirt.
So until then this is just placeholder.
-
You could tell it from the size of the image, and paint tells the DPI.
Ahh, you have inadvertently answered a question I was going to ask........as I could not find any answers to googling "how to determine the DPI of a png" until you said that!
So thanks man, still find it weird though that the resolution is THAT low (96dpi) and yet I am finding it fine to work with.
Ohh well, once Ive cleaned it all up it will be 300dpi in the final image.
Awesome waiting for it :)
-
Final placeholder version.
Cover will be added to the site permanently once perfect front image is found.
This cover has the back and spine logos I prefer, so if you prefer the other ones just just copy/paste the legal text of this cover to the other cover in my previous post.
I might redo the logos when the front image is replaced.
(https://www.mediafire.com/convkey/05c8/a1ft867aooohk4k4g.jpg) (http://www.mediafire.com/download/a1ft867aooohk4k/SNES_-_US_-_Legend_(UK)_V3.jpg)
-
In case you want to make a true NTSC-U Vertical Retail, as promised (although a day late), here is the front of Legend all filtered up and clone stamped the hell out of it.
(https://www.mediafire.com/convkey/9d4e/yuod342hm1ysf7v3g.jpg) (https://www.mediafire.com/view/?yuod342hm1ysf7v)
-
Thank you... but the image is unfortunately 144 DPI... but I can do place holder.
-
In case you want to make a true NTSC-U Vertical Retail, as promised (although a day late), here is the front of Legend all filtered up and clone stamped the hell out of it.
(https://www.mediafire.com/convkey/9d4e/yuod342hm1ysf7v3g.jpg) (https://www.mediafire.com/view/?yuod342hm1ysf7v)
This is nice, can't wait to see the final product. :)
-
Thank you... but the image is unfortunately 144 DPI... but I can do place holder.
I have a question about DPI.
If an image was ORIGINALLY a certain DPI, meaning it was at a certain scale with dots/pixels/detail per inch, has been completely cleaned up and effectively its "dots per inch" have been changed drastically through that clean up (ie: smoothing, bolding/solidifying of colours, removal of imperfections and "sand" ;D).............then at that point, is the DPI of the image no longer relevant?
Sure, when we are talking about an original scan, totally uncleaned, the higher the resolution will mean the more detail and hopefully the less clean up...........but after it has been cleaned, then all the imperfections a lower than 300/600dpi scan would bring, have been removed and the image much much clearer..........and ultimately, a high resolution?
Also, this image is bigger than it needs to and will be once its imported onto a 300dpi cover template.......so there will be no issues of distortion because it needs to re-sized/stretched.
Im not arguing here, it just occurred to me that surely the relevance of DPI once an image has been cleaned pixel by pixel..........is irrelevant, and perhaps the proof in the pudding would be if I had imported this onto the 300dpi template and THEN saved and uploaded it, its DPI would be 300 and would anyone know or notice in any way that THAT part of the cover was ORIGINALLY 144dpi, as it no longer is an image that is of that quality due to the clean up done?
-
The issue would be if you take a low dpi scan, let's say 96dpi, scale it up to 300, and start working on it. You can, effectively retrace, and smooth the hell out of it so it doesn't looked scaled up, BUT, the scaled up image will not have all the details present in a 300 or 600 dpi scan of the original image, because they were never there. Your finished image may look great, especially if it's a logo or something without much detail, but it it's something like a photo, your image may look flat.
-
I did quick check with planting the image to the template and it's good.
-
Cheers fellas..........kind of what I thought, I mean I didnt upscale the original scan, I just cleaned it up in the normal manner I do with any quality scan (which is at the level you guys are happy with now of course) and felt that the original DPI sort of becomes irrelevant at that point if you know what I mean.
Anywho, glad it looks Ok to you Arseen......as you are a hard fella to please! ;D
-
Awesome, I know a lot of people are highly anticipating, just like the Super Bomberman.
-
Awesome, I know a lot of people are highly anticipating, just like the Super Bomberman.
Wasn't that done?
-
Awesome, I know a lot of people are highly anticipating, just like the Super Bomberman.
Wasn't that done?
Yeah, so people are waiting on legend now.
-
Awesome, I know a lot of people are highly anticipating, just like the Super Bomberman.
I have to say.........it does make me chuckle a bit when I see/read you talking about all the "anticipation" and amount of people who "desperately" want covers...........and when they are posted its you and Arseen saying thanks and nothing else. ;D
I guess its just the way the game goes huh.........everyone wants what isnt there, and as soon as it is........NEXT! :P
-
Also............I now realise how mistaken I was about the quality of this scan. :o
;D
-
Also............I now realise how mistaken I was about the quality of this scan. :o
;D
Do you need me to re-scan the box?
-
Also............I now realise how mistaken I was about the quality of this scan. :o
;D
Do you need me to re-scan the box?
Dude, if you would that be GREAT!!!............as the back and spine logo are causing me quite a bit of trouble, and even with all this effort and clean up will more than likely still not look great.
Ive done the front, so no need to re-scan that but the back, including one of the spines with the logo's, would be awesome, thanks man.
I could feel this turning into another Super Bomberman! ;D
-
Also............I now realise how mistaken I was about the quality of this scan. :o
;D
Do you need me to re-scan the box?
Dude, if you would that be GREAT!!!............as the back and spine logo are causing me quite a bit of trouble, and even with all this effort and clean up will more than likely still not look great.
Ive done the front, so no need to re-scan that but the back, including one of the spines with the logo's, would be awesome, thanks man.
I could feel this turning into another Super Bomberman! ;D
Yeah, I'll do it that when I am back home today.
-
Just a quick question, can we use the spine from the front image?
-
Just a quick question, can we use the spine from the front image?
Would not hurt rescan.
-
Just a quick question, can we use the spine from the front image?
The logo from the front is quite different.........so for the sake of authenticity, thats why I asked for the it to be on the scan of the back like the one you sent me already.
Where you naturally flatten out the box to scan, you will get one of the spines in anyway........so no worries right?
-
No worries, just wondering, that's all. Thanks.
-
No worries, just wondering, that's all. Thanks.
Cool man, I was going to re-use the front and just re-colour it where necessary due to the low quality of the spine one.......but it was also very different style so was clearly not going to look right in terms of matching a retail look.
-
Here you go:
http://postimg.org/image/kjla9h24t/full/
-
Here you go:
http://postimg.org/image/kjla9h24t/full/
Thanks man but.............its still 96dpi!! lol.
Its twice the size, image dimension wise but the DPI (hence detail's needed to clean it up much better and easier) are exactly the same.
Its weird, as youve sent me lots of 300+ DPI images and they were ones you owned and had scanned in.......so whats changed? ;D
Anyway, dont worry, its not like its TERRIBLE and unworkable like many I have created very good covers from, so its cool.
-
Tha only thing change is my scanner. Let me know if I need to rescan again. Thanks.
-
This is the one in 600 DPI:
https://www.sendspace.com/file/lqzw83
-
This is the one in 600 DPI:
https://www.sendspace.com/file/lqzw83
Ahhh......gorgeous!!! ;D
Thanks man.
-
This is the one in 600 DPI:
https://www.sendspace.com/file/lqzw83
Ahhh......gorgeous!!! ;D
Thanks man.
Thank you, waiting for the Legend. I've just purchased a bulk of raw scan for SNES, so completing the list is possible. AWESOME.
-
This is the one in 600 DPI:
https://www.sendspace.com/file/lqzw83
Ahhh......gorgeous!!! ;D
Thanks man.
Thank you, waiting for the Legend. I've just purchased a bulk of raw scan for SNES, so completing the list is possible. AWESOME.
Dude, where the HELL do you get the money from man? lol.
Seems like whenever someone requests something........youre just like "I have just bought that!" or "No worries, I will buy a boxed copy of that and will scan when it arrives!".
Sorry, personal question I know.........just struck me with your latest throw away comment regarding your spending spree's, so it just had to be asked! ;D
-
I just want to get the list to be completed. Thanks.
-
I hope the finished product will be uploaded to this website, so everyone can get it for free.
-
Looks like retrogamecases just use the raw scans made the cover to sell:
https://www.retrogamecases.com/shop/snes-horizontal/legend/
-
Many of my covers are on that site too. :D
-
I just want to get the list to be completed. Thanks.
I can tell. ;D
Nearly done with Legend and Addams Family. :P
Man, I cannot WAIT till I can get this real world monkey off my back (crazy work loads STILL carrying on Im afraid, end of August now) and then we can really make a run at this list B!
-
Many of my covers are on that site too. :D
The worse part is he won't share his. Thanks.
-
Well, endeavouring to not have another Super Bomberman fiasco..........I have attacked this swine with a renewed hunger and defiance! :-[
So here it is......many thanks to Banisher for the re-scan of the back, as after how much trouble the front was, the back would have ended me I think. ;D
Hope everyone who has wanted this for so long likes it, and as always, if anything needs changing just let me know.
And before you say anything Arseen, :P , no I wont be re-capturing the screen shots, they are from a very high quality scan, I have run my filters and stuff over them, I have gone over them with a fine toothed clone stamping comb...........and..........well, no, I wont be playing through a game I dont care about, for a cover I dont need/want. ;D
If anyone has or wants to get screen shots for covers like these then I will gladly get them all slotted in.
Legend - NTSC - Horizontal Retail
(https://www.mediafire.com/convkey/b4e3/9qqpld4yinvlrr03g.jpg) (https://www.mediafire.com/view/?9qqpld4yinvlrr0)