The Cover Project

General Category => The Request Forum => Topic started by: tiktektak on January 06, 2012, 04:30:40 AM

Title: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: tiktektak on January 06, 2012, 04:30:40 AM

Hey guys!

I'd love to get a 600dpi raw for Knights in the Nightmare. Just aquired a cart only for cheap which now desperately needs a case.

There is one in our raw section but only 300dpi and kinda low resolution.

Thanks in advance!

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Mick Dundee on January 06, 2012, 06:32:12 AM

jpg Format -800 dpi Raw- http://www.mediafire.com/download.php?2z2y9i52dig0iey

 Tried to upload a tiff format but it didn't seem to go.

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: tiktektak on January 06, 2012, 08:27:05 AM

Thanks a ton. Tiff would have been best but I think some of the file uploader sites don't like it.

By the way. Did you put sth heavy on it when scanning? The spine looks a bit unsharp.

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Mick Dundee on January 06, 2012, 06:07:46 PM

not sure what your askin me.... and I use Gimp....soooo here: http://www.mediafire.com/imageview.php?quickkey=a2fahqo46jgm5q5&thumb=6

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Arseen on January 06, 2012, 06:52:47 PM

Quote from: Mick Dundee on January 06, 2012, 06:07:46 PM

not sure what your askin me.... and I use Gimp....soooo here: http://www.mediafire.com/imageview.php?quickkey=a2fahqo46jgm5q5&thumb=6

He's simply asking are you putting something heavy and flat (like a book) on the cover when you scan it soit is super flat.

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Mick Dundee on January 06, 2012, 08:40:03 PM

Ohhhh....ok.  I thought Sth was an abbreviation for some type of setting... and yes...kinda.  Its like a large Baseball card sleeve I placed on top of the artwork...and even after that I held my hand down on the center of the scanner lid the whole time it scanned.

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: tiktektak on January 07, 2012, 06:23:14 AM

Quote from: Mick Dundee on January 06, 2012, 08:40:03 PM

Ohhhh....ok.  I thought Sth was an abbreviation for some type of setting... and yes...kinda.  Its like a large Baseball card sleeve I placed on top of the artwork...and even after that I held my hand down on the center of the scanner lid the whole time it scanned.

Sorry for the confusion. Sth = something. ;)

It would really be best if you used a big heavy book. Won't do anything to the scanner and then it is 100% flat so I won't need to sharp it too much.
No biggie though if it'S not possible you hlped me a lot with your scan allready!

Thanks!!!! :)

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Mick Dundee on January 07, 2012, 07:40:16 AM

Here is another go at the cover...i put the thin plastic sleeve down and then 2 dbz sets on top of that.  Hope that helps more. 
http://www.mediafire.com/download.php?lyz73m73xmb73vf
 
 If that is still messed up looking I'll re-scan JUST the spine at a higher dpi...that should keep the data size down

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: tiktektak on January 08, 2012, 05:46:33 AM

Actually te hfirst one was better. Maybe it's the best we get from the scanner. Can work with it though so expect a cover soon. ;)

Title: Re: Knights in the Nightmare - DS - US Retail - raw scans needed
Post by: Mick Dundee on January 08, 2012, 09:32:56 AM

the logo does have a bit of a hazy blurry look to it anyhow.