General Category > General Discussion
Universal Game Cases - Can anyone sell a UK guy a few?
Arseen:
No modifications, I only took the inner DVD holder trays away.
In other words they are just loose inside, altough the front and back DVD holders keep the games bit in place, and if you have thicker manual in there too, games stay put.
scarmullet:
--- Quote from: Arseen on March 02, 2011, 04:13:54 PM ---No modifications, I only took the inner DVD holder trays away.
In other words they are just loose inside, altough the front and back DVD holders keep the games bit in place, and if you have thicker manual in there too, games stay put.
--- End quote ---
I had thought about getting these and glueing foamboard in the cover to keep carts in place.
scarmullet:
--- Quote from: duke2k7 on March 02, 2011, 04:49:26 PM ---can i ask a stupid questionhere, or make a new thread in the right section? its about printing those french box things in GIMP. I'm guessing that as long as the printing is 300dpi, then we're good to just press print?
--- End quote ---
Might wana make a proper cover out of them first, clean them up and stuff.
scarmullet:
I found DVD stacker cases cheaper than UGC boxes. $0.29 a case instead of $0.42.
would these work or are they the wrong dimensions?
http://www.cdrom2go.com/product/usdm-p59072-1-inch-stacker-case-8-disc-black_1951_72.htm
Anonymity:
Should work when you cut away the disc holding tap and the ridges.
width is 1" or 25.4mm (the ones Arseen uses are 27.5mm) but I doubt the difference is too big.