Author Topic: Request: Owlboy - PS4 - NTSC - Retail  (Read 191 times)

December 09, 2019, 03:27:40 PM
Read 191 times

MJO1450

  • Information Offline
  • Newbie+
  • Posts: 6
I have been looking for a full front to back cover scan of the Owlboy PS4 box art with no luck. If anyone can get me this scan, or even a custom if possible, I would be highly appreciative!
« Last Edit: December 09, 2019, 03:29:25 PM by MJO1450 »

December 12, 2019, 01:13:13 AM
Reply #1

BLINXERIZER

  • *
  • Information Offline
  • Newbie++
  • Posts: 41
I can get it for you in a few.

December 12, 2019, 09:21:19 AM
Reply #2

MJO1450

  • Information Offline
  • Newbie+
  • Posts: 6

December 12, 2019, 11:47:37 AM
Reply #3

BLINXERIZER

  • *
  • Information Offline
  • Newbie++
  • Posts: 41
Note this will have to printed on 8 1/2 X 14 as it cuts off on letter size. PS4 covers are an odd size, like Blu-Ray covers. Not standard DVD case size. I had to scan it as such to get everything and then I cropped off the extra wite (it's slightly crooked by a very small amount but that's cause I couldn't get it to lay completely flat)

Front (JPEG)

https://drive.google.com/open?id=1mhPLvYUf6YojO3p1CsX-cSlIZXOkVJvl

Back (JPEG)

https://drive.google.com/open?id=1a53EUNFfakWiWR-B9MV01gXr1emgdEDr

Front and Back (in PDF format)

https://drive.google.com/open?id=1UpJ1oy-d13uAlQJOqTgLykuSQ_kuWn0R

December 12, 2019, 11:51:10 AM
Reply #4

MJO1450

  • Information Offline
  • Newbie+
  • Posts: 6
This is for a regular PS4 case, so this should be perfect. Thanks!

December 12, 2019, 11:56:22 AM
Reply #5

BLINXERIZER

  • *
  • Information Offline
  • Newbie++
  • Posts: 41
No problem.

I just meant that PS4 covers don't fit all the way on normal letter sized paper.

December 12, 2019, 03:27:11 PM
Reply #6

dreadnx

  • ***
  • Information Offline
  • Full Member
  • Posts: 115
  • Beer -N- Games
No problem.

I just meant that PS4 covers don't fit all the way on normal letter sized paper.

I use standard letter size photo paper. Are you printing borderless? do you have your sizes configured correct?

December 12, 2019, 07:36:02 PM
Reply #7

BLINXERIZER

  • *
  • Information Offline
  • Newbie++
  • Posts: 41
I didn't print anything. I was just going by what my scanner was cutting off when I scanned at letter size.