General Category > The Request Forum
Request: New PS4 Covers
UpstandingMike:
I got a scan for Shenmue III, but not sure if they're coming out right (first post), if this isn't right, I'll need some pointers on how to make them properly usable.
Front:
https://drive.google.com/open?id=1ptWxkIG-T_YcG0Mu31XWhvlg2C0L7h4Q
Back:
https://drive.google.com/open?id=1ZGrvbEM46qqi1od2Fp4mtHRdCV5iWKbO
Arseen:
Quality looks good, but it's too low resolution (200).
We want atleast 300 but prefer 600.
Also if you have time keep the cover between hardcover book under heavy weight for day so it will be super flat (as now you can see the folds by the spine).
Also 2: Make sure nothing is cut off from the edge by the scanner's edge.
Thank you.
Cover Collector:
--- Quote from: UpstandingMike on February 04, 2020, 02:36:47 AM ---I got a scan for Shenmue III, but not sure if they're coming out right (first post), if this isn't right, I'll need some pointers on how to make them properly usable.
Front:
https://drive.google.com/open?id=1ptWxkIG-T_YcG0Mu31XWhvlg2C0L7h4Q
Back:
https://drive.google.com/open?id=1ZGrvbEM46qqi1od2Fp4mtHRdCV5iWKbO
--- End quote ---
Hi! first thanks for the scans! it would be nice if you can scan it at a higher resolution,like the Dragon Ball Z Kakarot cover (6453x3812x24BPP) and without the white borders,the Inlay scan (Back) i don't need it,just the (Front) scan,if you could,please download the Dragon Ball Z Kakarot scan and take a look,and try to make it as close as you can,other than that,maybe sheep2001,ShoothimNow or some one else could give some more help...
Cover Collector:
--- Quote from: Arseen on February 04, 2020, 02:52:20 AM ---Quality looks good, but it's too low resolution (200).
We want atleast 300 but prefer 600.
Also if you have time keep the cover between hardcover book under heavy weight for day so it will be super flat (as now you can see the folds by the spine).
Also 2: Make sure nothing is cut off from the edge by the scanner's edge.
Thank you.
--- End quote ---
Thank you so much for the help!
DrewschbagDG:
The way I do mine is about 1/4 cm from the edge of the scanner, held down by two 3DS cases. Using the scanner options on the printer will cause a less than quality image, so I would suggest using specific scanner software. (I use ScanGear with my Canon printer/scanner).