Another alternative for UGC for non US ppl

[Arseen]

Can this inlay design be printed on din a4 paper? (europe standard letter size)? Thats the hole reason im using mine 

Perfect fit with 5mm margins.

[e_brugal]

This looks excellent, but the only downside is that it will not hold manuals, in my case that's a must have

GBA SP console manual is small enough to fit in there.
With some additional R&D it should be somewhat easy to make spot for it.

I'm talking in general, using it for game cartridge also.

[GameScanner.org]

This looks excellent, but the only downside is that it will not hold manuals, in my case that's a must have

Worry not, I'm all about manuals too.

This looks excellent, but the only downside is that it will not hold manuals, in my case that's a must have

GBA SP console manual is small enough to fit in there.
With some additional R&D it should be somewhat easy to make spot for it.

Not much R&D required

Can this inlay design be printed on din a4 paper? (europe standard letter size)? Thats the hole reason im using mine  

If you have one, scan it facing down @600dpi. I'll design an A4 template for it. Should fit.

This looks excellent, but the only downside is that it will not hold manuals, in my case that's a must have

GBA SP console manual is small enough to fit in there.
With some additional R&D it should be somewhat easy to make spot for it.

I'm talking in general, using it for game cartridge also.

Simple solution:
Double-sided tape, X-acto blade and some plastic sheet.


I went overboard here with laser-cut foam board
Fits like a glove.


Detailed pics here:
http://imageevent.com/gamescans/personal/vhsgamesce