XBOX360 - Scene It? - NTSC

[Predator Ranger]

Hey all. I recently picked up Scene It? for the 360. Unfortunately, the disc comes in a thin, clear case with a tard cover (uploading that now). Could someone out there take this and make it into a full-fledged XBox 360 cover? Full DVD case sized, with the banners and such across the top and spine? Custom cover is fine, but I'll update this post once the raw is up. Thanks!


Disc Cover: http://www.thecoverproject.net/uploads/raw/PR%20Mega%20X.retail.raw_x360_sceneit.jpg

Package Back: http://www.thecoverproject.net/uploads/raw/PR%20Mega%20X.retail.raw_x360_sceneit2.jpg

Package Side 1: http://www.thecoverproject.net/uploads/raw/PR%20Mega%20X.retail.raw_x360_sceneit3.jpg

Package Side 2: http://www.thecoverproject.net/uploads/raw/PR%20Mega%20X.retail.raw_x360_sceneit5.jpg

Package Front: http://www.thecoverproject.net/uploads/raw/PR%20Mega%20X.retail.raw_x360_sceneit4.jpg

I can scan in the front of the package tomorrow when I grab some Goo Gone and get the sticker off. Anyone care to take a shot?

[ShaggyB]

oooo, i too would like that to be made. I have found a PAL version and done my best to convert it to NTSC but its still not as good as i have gotten from this site

[Predator Ranger]

oooo, i too would like that to be made. I have found a PAL version and done my best to convert it to NTSC but its still not as good as i have gotten from this site

Do you still have the original PAL version available? If you post it here, one of the artists may be able to work it into NTSC

[ShaggyB]

http://www.cdcovers.cc/list/xbox360/s

just go there and pull it from the list.... i can never get the upload to work for me here.

needs the pal in right top corner and on the spine changed. also the rating should be T for teen. and if they can id request the 60hz pic to go......

[Predator Ranger]

http://www.cdcovers.cc/list/xbox360/s

just go there and pull it from the list.... i can never get the upload to work for me here.

Ah, looks a little low res. Ah well -- updated the original post with the front package scan. Any takers?

[ShaggyB]

yeah its low rez..... how do you upload and then display i have altered the one i showed you

[ShaggyB]

ok i hope this works.... resolution is a bit low but its the best my limited skillz can do

[sorwah]

Here is my work on the scanned display box (Hence the 'For Display Only' box at the bottom) for the NTSC. I used it awhile ago to do a PAL one custom for someone so I had this laying around:

http://www.thecoverproject.net/uploads/Sorwah.retail.x360_scene_it-ntsc.jpg

And the PAL one I did awhile back:

http://www.thecoverproject.net/uploads/sorwah.custom.x360_scene_it-pal_eu.jpg

I have an edited NTSC one like the PAL that shows the ribbon overlap the 'For Display Only' box, but I can't get the box edited out (i'm not that good) so it looks awkward.

[Grumbleduke]

Here is my work on the scanned display box (Hence the 'For Display Only' box at the bottom) for the NTSC. I used it awhile ago to do a PAL one custom for someone so I had this laying around:

http://www.thecoverproject.net/uploads/Sorwah.retail.x360_scene_it-ntsc.jpg

And the PAL one I did awhile back:

http://www.thecoverproject.net/uploads/sorwah.custom.x360_scene_it-pal_eu.jpg

I have an edited NTSC one like the PAL that shows the ribbon overlap the 'For Display Only' box, but I can't get the box edited out (i'm not that good) so it looks awkward.

I hope you dont mind but i had a go at getting rid of the display box. Its not changed in any other way and is still your work and registered as such

http://www.thecoverproject.net/uploads/Sorwah.retail.x360_scene_it_2.jpg

...and thanks for putting them up,i used the PAL one for my copy.

[Predator Ranger]

Wow -- I'm completely impressed! Shaggy, thanks for your efforts; you did a great job with what you had to work with!

Sorwah, your cover looks fantastic, thanks a lot for that

And Grumble, your finishing touches make that slight yet very noticeable difference -- another job well done.

Again, thanks to all!

[sorwah]

Hey man, thanks. 

All I was able to do with the scans I had at the time was the damn film strip. Thanks a lot.

Edit: Aw damn, just noticed a major issue with the spine PAL spot. I'll re-work it (2 min job) with the new NTSC custom so it's fixed.

[sorwah]

Okay guys I re-up'd the PAL:

http://www.thecoverproject.net/uploads/sorwah.custom.x360_scene_it-pal_eu.jpg

Everything should be fine now! Thanks for the help.

[MisterCreazil]

I hope you dont mind but i had a go at getting rid of the display box. Its not changed in any other way and is still your work and registered as such

http://www.thecoverproject.net/uploads/Sorwah.retail.x360_scene_it_2.jpg

...and thanks for putting them up,i used the PAL one for my copy.

Wow, how did you get rid of the "display box" at the bottom?

[sorwah]

I'd assume copied, pasted, rasterized, and re-contrasted the section from the scan.

[Grumbleduke]

I'd assume copied, pasted, rasterized, and re-contrasted the section from the scan.

...and a bit of hand painting.