I can't get my covers to print the right size.

[Failrunner]

I followed every tutorial that is online and the print is either way too big or way too small. Is there any software that has a template I can use or something? I used to have something like that and it worked great. Nothing I try is working.

[e_brugal]

Well, i print directly from photoshop and works every time. But if you open the picture from a picture viewer like the one windows use it doesn't print the right size.

Try printing from photoshop or something similar

[Arseen]

Use MS Paint (the one that comes with all Windowses)

1. Set First chec the DPI from the properties.

If 96 use scaling at 32%.
If 300 all is fine so far. Go to point 2.

2. Check that fit to paper is off, scaling is set to 100%, centering is set on on both horizontal and vertical, orientation is set to Landscape, and the paper you are using is A4 or Legal.

Did this help?

[Failrunner]

Use MS Paint (the one that comes with all Windowses)

1. Set First chec the DPI from the properties.

If 96 use scaling at 32%.
If 300 all is fine so far. Go to point 2.

2. Check that fit to paper is off, scaling is set to 100%, centering is set on on both horizontal and vertical, orientation is set to Landscape, and the paper you are using is A4 or Legal.

Did this help?

Thanks! I got 1 before I ran out of ink. Lol.

[Arseen]

No problem.

[Gutling]

It toke me probably half a stack of paper to figure out everything the first time. Make sure to write it all down as you figure it out.

[Failrunner]

It toke me probably half a stack of paper to figure out everything the first time. Make sure to write it all down as you figure it out.

I remember when I used to try to fit cart scans. I got that right the first time. Lol. I've done this on and off for years but i used to use software that had templates that worked. i forgot what software it was though. I was never able to do it like this until just now. Lol.