PS1 Jewel case Memory card Holder

[TDIRunner]

Apparantly, there were other first party memory cards that had multiple pages with extra blocks, but these were not VMUs since they didn't have a screen or buttons.  I don't have any of these, but they would probably get their own cover anway.  So I wouldn't worry about those.

[e_brugal]

What I mean is if they save the same way as the PS memory, by block. If you see the one I made for the ps1 in the back I added 15 spaces for each memory to write each game on each memory,  Is for me to know what should I putting the back

Or should I live it just with an image or add some description of each item in the back as the one posted in the site made for ds case, the one you post as an example?

[TDIRunner]

I can't remember, but I think it works similar to a PS1 memory card like you said.  One save per block.  Although, like PS1 games, some games use up more than one block at a time.  Maybe someone else can chime in if I'm wrong.  I won't be able to check until this evening.

However, 200 blocks is a lot to list on the back, so you might just want to make it generic like the example I provided.  I can always make a list of the games saved on a separate piece of paper and store it inside like an instruction manual.

[e_brugal]

Ok, so generic it goes 

[Kovorkian]

I found this at a thrift store today, and remembered this thread.

 pics are huge

 





    

[e_brugal]

how much did you pay for it?

[TDIRunner]

That's cool.  I would still prefer e_brugal's artwork, but if it was cheap enough, I would get one just for the inside portion.

[e_brugal]

Ok, so far this is what i have. only fronts

i know that in the lower one i use the Japanese color (orange) but is so hard to fin good material for the US (red) one. in the lower one you can change the spine name from VMU, MIC or JU PA



Same as the first one, in the lower one Japanese logo.....


The lower one is with the pal logo, name on the spine


and here is the only Red US logo i could find with good quality, in this two names iin the spine is what identify what you have inside


Any comments, changes are acepted, remember that this are only fronts for now 

Edit: Ithink i should add the Dreamcast logo in the upper part of the first 3 blacks one

[TDIRunner]

These look awesome!

I'll take a closer look this evening when I have more free time.  The difficult part will be deciding which one I want to use.   

Nice to see the jumper pack in there as well.  I still need to engineer a way to fit those in the jewel case. 

Crap, I also need more jewel cases.

[e_brugal]

These look awesome!

I'll take a closer look this evening when I have more free time.  The difficult part will be deciding which one I want to use.   

Nice to see the jumper pack in there as well.  I still need to engineer a way to fit those in the jewel case. 

Crap, I also need more jewel cases.

  lol

I will make some modification and post again later

[e_brugal]

Just Added Dream cast logo

[Kovorkian]

how much did you pay for it?

 ~$1

[TDIRunner]

$1 sounds about right, but once you figure in shipping I just assume make my own.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=171359795962

[TDIRunner]

These look great!  I have the VMU cover printed out and installed. 

For some reason, I'm having trouble downloading the jumper pack. 

[Ozzy_98]

"What's in this case"
"My Dreamcast microphone"
"What do you use it for?"
"To talk to my seamen"
"...oh.  Um, I have to run now.  Quickly."


Yes, dreamcast seamen jokes are overdone, humor me.  It's Friday and I can't leave the house cause I'm on call this weekend, and I'm BORED. Also late so I have to be quiet else I'll wake the wife.