| General Category > General Discussion |
| n64 repair |
| (1/8) > >> |
| destindude04u:
I have a few n64 systems that I can't get to work, they power on but no picture its weird cause I've had them apart and got them to work but once i put them back together and everything no picture again if anyone can give me advise or help or knows how to fix this please let me know. Thank you Michael |
| Seymor Onion:
Wiggle the AV Cables. Make sure the Cart connectors are clean, and you have a Game Cart plugged into the system. Check the Jumper Pak area on the Console. It should have something stuck in there (Pictures would be nice). Sometimes the Jumper or Expansion Paks go bad. Also, try using AC Adapters and Jumper/Expansion Paks from known working systems, on the seemingly broken ones. |
| destindude04u:
Thank you I will try that |
| FFXIK:
More than likely it is your jumper pak. Try reseating it. If the contacts in the expansion bay get dirty it will cause the unit to malfunction. This will also be the case if you have a working unit that goes through a "reset loop" during play. |
| destindude04u:
didnt think about that but you could be right i got a bunch of cheap 3rd party jumper paks that could be my problem |
| Navigation |
| Message Index |
| Next page |