The Cover Project

General Category => The Request Forum => Topic started by: Cloisonne on September 12, 2011, 01:24:10 AM

Title: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Cloisonne on September 12, 2011, 01:24:10 AM

Hey, if anybody could provide me with DS case covers for both Nintendogs Lab & Friends (DS), and Tom & Jerry (GB), it would be greatly appreciated! If it's difficult to find scans of either (there should be a scan of Nintendogs somewhere, unsure of Tom & Jerry), a mockup would be fine as well; I just need some sort of cover for these games!

Thanks in advance ;D

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Arseen on September 12, 2011, 03:11:33 AM

Nintendogs I should have, will check when at home.

And which Tom & Jerry

Tom & Jerry:
(http://image.com.com/gamespot/images/bigboxshots/0/563300_96857_front.jpg)

Tom & Jerry 2:
(http://image.com.com/gamespot/images/bigboxshots/1/563301_81942_front.jpg)

I don't have either but the second could be possible to make from NES/SNES version.

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Staf on September 12, 2011, 10:28:42 AM

I just scanned my Nintendogs. Here's the RAW of it scanned at 600 dpi. This cover is not yet formatted to simply print out. Let me know if I did something wrong or should do something different the next time I scan a picture.

(http://www.mediafire.com/imgbnc.php/5c145cb824e6152ecbe1126208dd1f323ba749aea4568df360a51074ad0ceb8a4g.jpg) (http://www.mediafire.com/i/?m3wx27a8i851x57)

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Cloisonne on September 12, 2011, 11:03:51 AM

@Staf: Looks good! How should I format it to be printed out?

@Arseen: It's the first one.

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Staf on September 12, 2011, 11:54:54 AM

http://www.mediafire.com/i/?8p4mrcxxuoclpm3 (http://www.mediafire.com/i/?8p4mrcxxuoclpm3)

I made it into a cover. This is my first time doing a full cover, so things might be slightly off. You should just be able to print this one, though.

The only adjustments I made was to get the spine fully green, the DS part of the spine white, and the back black box to be blacker.

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Arseen on September 12, 2011, 01:39:07 PM

I think in this case the 600DPI scanning backfired, the imaga got grainy especially the screenshots, the dogs on the back cover and the text.
Try rescanning @300DPI

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Staf on September 12, 2011, 02:44:34 PM

No problem. I can rescan it late tonight when I get home.

EDIT: On second thought, I ran out of time tonight. Mid-day tomorrow I will have time for sure.

Title: Re: Request: Nintendogs Lab & Friends (DS), and Tom & Jerry (GB) Request
Post by: Mel on June 01, 2014, 12:24:12 PM

 Nintendogs Lab & Friends
(http://www.mediafire.com/convkey/9d7a/42bkfawci8ind954g.jpg) (http://www.mediafire.com/view/42bkfawci8ind95/Nintendolabsandfriends.jpg)