The Cover Project
General Category => The Photo Gallery => Topic started by: Arseen on October 28, 2009, 01:02:59 PM
-
Here is mine, not quite finished yet:
(http://img7.imageshack.us/img7/8618/img9046e.jpg)
The room is 276cm high and shelves 240 cm wide (about 9 feet high and 8 feet wide)
New picture, still not quite finished
(http://img256.imageshack.us/img256/8015/img9048.jpg)
Still missing:
- Few shelves
- PS1 games
- PS2 games
- PSP games
- Most of the NES games (just bought about 100 new ones, not yet arrived)
- Most of the SNES games
- DC games
- GB, GBC & GBA games
- VB games
- DS games
- Mega Drive, 32-X, Mega CD games
- Saturn games
- Few odd games
Now that I've shown part of my collection, help me case the rest.
Most of what I need can be found here:
http://www.thecoverproject.net/forums/index.php?topic=2733.0
http://www.thecoverproject.net/forums/index.php?topic=2720.0
http://www.thecoverproject.net/forums/index.php?topic=2737.0
-
not bad, looks like you got a nice Paintball Mask too
-
What kind of case is that that you're using for your NES games?
-
not bad, looks like you got a nice Paintball Mask too
It's my older little brother's. Room was his but he moved together with his girl friend
What kind of case is that that you're using for your NES games?
All the NES, SNES and Jaguar covers use double wide DVD covers.
-
All the NES, SNES and Jaguar covers use double wide DVD covers.
Where did you buy them from?
-
All the NES, SNES and Jaguar covers use double wide DVD covers.
Where did you buy them from?
www.cityplus.fi
I bought these:
http://kauppa.cityplus.fi/fin/index.php?mp=196&category=196&group1=185&product=787
Not sure do they sell to other countries than Finland.
Anyway covers on thecoverproject fit nicely into double wide DVD cases about 25-28mm thick.
-
www.cityplus.fi
I bought these:
http://kauppa.cityplus.fi/fin/index.php?mp=196&category=196&group1=185&product=787
Not sure do they sell to other countries than Finland.
Anyway covers on thecoverproject fit nicely into double wide DVD cases about 25-28mm thick.
Damn. I was hoping you got them from Walmart or something. Haha.
-
www.cityplus.fi
I bought these:
http://kauppa.cityplus.fi/fin/index.php?mp=196&category=196&group1=185&product=787
Not sure do they sell to other countries than Finland.
Anyway covers on thecoverproject fit nicely into double wide DVD cases about 25-28mm thick.
Damn. I was hoping you got them from Walmart or something. Haha.
They do sell them in the US.. They are usually called Stack Packs or Multi Cases. They accommodate between 6 and 10 dvds and are 28mm thick.
http://microcenter.com/single_product_results.phtml?product_id=0239435
Sorry but Walmart does not carry them.. :)
-
Sorry but Walmart does not carry them.. :)
Do you know if any place that might carry them? Trying to avoid buying online.
-
Sorry but Walmart does not carry them.. :)
Do you know if any place that might carry them? Trying to avoid buying online.
FYE/Best Buy/Circut City/etc had DVD cases if I remember correctly (Look on their websites before wasting a trip lol). Do mind that it's like $10 per pack of ten usually.
-
Sorry but Walmart does not carry them.. :)
Do you know if any place that might carry them? Trying to avoid buying online.
Micro center is actually a chain of electronics stores.. But I don't see that they have them in LA. I know Best buy dose not carry them either.
-
Uploaded new picture and added what is still missing from the picture.
Please read the three links and help me better my collection. (will not write finish the collection AS IT WILL NEVER BE READY!!!)
-
That's a nice setup you got going there.
I'm curious what the advantages would be for double DVD cases over UGC, especially for cartridges. Aside from the fact that it's probably easier to get one over the other in Finland.
-
That's a nice setup you got going there.
Thanx. I will finish the shelves tomorrow (Wednesday)
I'm curious what the advantages would be for double DVD cases over UGC, especially for cartridges. Aside from the fact that it's probably easier to get one over the other in Finland.
No other advance that I can think of.
To fit game with manual I have to rip the inner disc trays away (actually the place where I order does that and gives me little bit of discount, 'cos they can sell them to libraries as replacement parts) and cut the disc holding parts away, otherwise the case bulges.
-
(http://img205.imageshack.us/img205/9063/img9049p.jpg)
Almost finished shelves, plannin to add one more to the bottom.
As you see many games still need covers.
-
damn.... :)
-
It looks great! I LOVE THE BLACK CASES!!!!
Where did you get those?
:o
-
It looks great! I LOVE THE BLACK CASES!!!!
Where did you get those?
:o
Pick from earlier in this topic:
All the NES, SNES and Jaguar covers use double wide DVD covers.
Where did you buy them from?
www.cityplus.fi
I bought these:
http://kauppa.cityplus.fi/fin/index.php?mp=196&category=196&group1=185&product=787
Not sure do they sell to other countries than Finland.
Anyway covers on thecoverproject fit nicely into double wide DVD cases about 25-28mm thick.
Anyway I use double wide DVD cases, 27.5 mm (1.1") thick.
If you were European, getting them would have been somewhat easy.
But it seems that non-European users, especially US ones, have hard time finding them.
You just have to try to find the real UGC's that we Europeans have hard time finding.
-
Any of the big dvd/bd case shops should have 25-28mm cases, most will be the trays but some will be stackpaks.
Examples from the 2 places I frequent most...
American-Digital
3 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1050&c=1967&name=DVDCase-BlackTripleM-LockHub
4 Disc (28mm) http://www.american-digital.com/prodsite/product.asp?p=1052&c=1967&name=DVDCase-BlackQuadM-LockHub
5 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1419&c=1967&name=DVDCase-BlackFiveDVDM-LockHub
6 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1420&c=1967&name=DVDCase-BlackSixDVDM-LockHub
7 Disc (27mm) http://www.american-digital.com/prodsite/product.asp?p=2051&c=1967&name=DVDCase-BlackSevenDVDHolder
8 Disc (27mm) http://www.american-digital.com/prodsite/product.asp?p=2052&c=1967&name=DVDCase-BlackEightDVDHolder
9 Disc (33mm) http://www.american-digital.com/prodsite/product.asp?p=2110&c=1967&name=DVDCase-BlackNineDVDHolder
SleeveTown
http://www.sleevetown.com/dvd-case-multi.shtml
Basically, at least for these ones you just rip out the insert trays.
-
Any of the big dvd/bd case shops should have 25-28mm cases, most will be the trays but some will be stackpaks.
Examples from the 2 places I frequent most...
American-Digital
3 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1050&c=1967&name=DVDCase-BlackTripleM-LockHub
4 Disc (28mm) http://www.american-digital.com/prodsite/product.asp?p=1052&c=1967&name=DVDCase-BlackQuadM-LockHub
5 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1419&c=1967&name=DVDCase-BlackFiveDVDM-LockHub
6 Disc (25mm) http://www.american-digital.com/prodsite/product.asp?p=1420&c=1967&name=DVDCase-BlackSixDVDM-LockHub
7 Disc (27mm) http://www.american-digital.com/prodsite/product.asp?p=2051&c=1967&name=DVDCase-BlackSevenDVDHolder
8 Disc (27mm) http://www.american-digital.com/prodsite/product.asp?p=2052&c=1967&name=DVDCase-BlackEightDVDHolder
9 Disc (33mm) http://www.american-digital.com/prodsite/product.asp?p=2110&c=1967&name=DVDCase-BlackNineDVDHolder
SleeveTown
http://www.sleevetown.com/dvd-case-multi.shtml
Basically, at least for these ones you just rip out the insert trays.
Good news for Americans. Last time nobody could find them. (see first page of this topic).
-
Sleeve City looks great! thanks for the link.
-
Just quick update on how ugly my collections looks with so many temporary white spines.
And yes the top 5 shelves are NES games, I actually own or are in the mail arriving next week. And there are more games in storage which I don't remember what they are.
Plus still almost all my SNES and newer games are not in picture.
(http://img27.imageshack.us/img27/8646/img9049ro.jpg)
-
Ha! I was looking for this post a little while ago.
Amazing collection.
-
Ha! I was looking for this post a little while ago.
Amazing collection.
And it's still missing missing my GB, GBA, VB, MD, MCD, 32-X, N64, XBOX, PSP, DS, PS1 and some other games, and my DVD collection, because I ran out of room on the shelves!!!
The room is 276cm high and shelves 240 cm wide (about 9 feet high and 8 feet wide) and there is 12 of the shelves, I think I can squeeze 1 more to the bottom, but that's not gonna help much.
-
The CD32 looks pretty sad there on the floor... :'(
-
The CD32 looks pretty sad there on the floor... :'(
Yes and no.
Yes it looks sad all alone there
No it's not on the floor, it's on a box more than 30cm off the floor.
-
The CD32 looks pretty sad there on the floor... :'(
Yes and no.
Yes it looks sad all alone there
No it's not on the floor, it's on a box more than 30cm off the floor.
For me it looks like it is standing on a Amiga 500 or an C64 or the likes.... ;D
-
The CD32 looks pretty sad there on the floor... :'(
Yes and no.
Yes it looks sad all alone there
No it's not on the floor, it's on a box more than 30cm off the floor.
For me it looks like it is standing on a Amiga 500 or an C64 or the likes.... ;D
I went to the game room to check, and you are right least partly:
It's 2/3 - 3/4 on the bottom shelf (which is 32 CM from the floor) and 1/4 - 1/3 on C128 which is on the before mentioned box.
BUT MOST IMPORTANTLY IT'S NOT ON THE FLOOR.
-
Here is new shot of my collection.
(http://img34.imageshack.us/img34/5245/img0045cr.jpg)
As you can see space is running out.
I can still get more space for my classic Nintendo games (NES AND SNES) with some work: By removing the PS1, PS2, PS3, DC and X360 games, and re-spacing some shelves and adding 1 more to the bottom, I get 5 shelves more for them, but that is only helping a bit, because I have at least 400 them yet not even in cases and almost 200 arriving soon in mail.
And then there are the other games on other consoles.
-
It's quite impressive as is. Haven't quite figured out how I want to organize my gameroom and games but this looks like a good way to do it :)
-
Im still itching to post pictures of my collection but I think Im gonna wait till most of my games are cased up first.
-
Yup, that's exactly how I plan to do it. SNES collection will be up first. I have the cases, I have all the games I want. I just need a few more covers and then I'll print them all in one go. I'm quite excited about it :D
-
I try to do the rearranging and cleaning on Wednesday , when I have day off and will load new picture after that.
-
I gotta ask buddy. How bad does it burn your ass to know your stuck with clear UGC's now when you already have so many black ones? That would drive me crazy! Its a shame cause Id much prefer them black ones but Id imagine it costs them more to manufacture.
-
I gotta ask buddy. How bad does it burn your ass to know your stuck with clear UGC's now when you already have so many black ones? That would drive me crazy! Its a shame cause Id much prefer them black ones but Id imagine it costs them more to manufacture.
You mean me?
It probably would, but UGC are so hard to get here, that I have always used 27,5 mm thick 8-DVD cases (I just rip the inner trays away instead of them), so no that problem for me, as those are still available. ;D :D ::)
-
Oh well there you go. Thats a good solution. I thought those were the "no longer available" black UGC's. :P
-
im gonna start on my own shelving unit soon. I saw badchads home made unit and its so sick it made me want to build one the same lol. i'll post some pics up whenever i get that finished :)
-
(http://i37.tinypic.com/1zp3bma.jpg)
one side of the shelf done!!!
and here is a pic of my current gaming setup
(lighting sucks because i havent installed it yet, i just have a lamp lighting the whole gaming area lol)
(http://i37.tinypic.com/nf40m1.jpg)
on the top is 2 wall mounted 50" samsung's
bottom from left to right is:
ps3, my 360, n64, nes, snes, black wii, gf's 360, ps2, dvd/vcr combo beast of a machine
-
Nice amount of games. ;D
That looks great Jonesat. Nice collection. I don't want to be rude but would you mind making another thread and show your collection there? ;)
^ fixed ;)
-
"Release your anger, destroy you it will."
-
Nice amount of games. ;D
That looks great Jonesat. Nice collection. I don't want to be rude but would you mind making another thread and show your collection there? ;)
^ fixed ;)
Hadn't before noticed that my polite message was edited! ;D
Anyway here is tiny update to my collection.
(http://img824.imageshack.us/img824/6232/img9270p.jpg)
I'll try to re-arrange my collection on Sunday and upload pictures.
-
I do like the way those snes cartridges are displayed
-
I do like the way those snes cartridges are displayed
I just put them there temporarily to show them.
Of these 10 games only 2 are missing covers (LOZ: Parallel Worlds and Dragon Quest 1&2)... in vertical US style... hint, hint...
For Zelda this would nice front: http://www.thecoverproject.net/view.php?cover_id=8032
From here you can get the back text (the story line part): http://zelda.wikia.com/wiki/The_Legend_of_Zelda:_Parallel_Worlds
And here are 3 nice screenshots:
http://i361.photobucket.com/albums/oo58/mappster81/LegendOfZeldaParallelWorldsSpeed-10.jpg
http://i361.photobucket.com/albums/oo58/mappster81/LegendOfZeldaParallelWorldsSpeed-12.jpg
http://www.vizzed.com/vizzedboard/snes/screenshot/Zelda%20Parallel%20Worlds-2.png
Here are more:
http://www.google.fi/images?q=Legend+Of+Zelda+Parallel+Worlds&hl=fi&client=firefox-a&rls=org.mozilla:fi:official&gbv=2&tbs=isch:1&ei=q7h2TN_VIoWAswa01833BQ&sa=N&start=60&ndsp=20#q=Legend+Of+Zelda+Parallel+Worlds&hl=fi&client=firefox-a&rls=org.mozilla:fi:official&gbv=2&ndsp=20&tbs=isch:1,isz:m&source=lnt&sa=X&ei=sbh2TJzJKojFswahrZjsBQ&ved=0CAgQpwU4PA
-
Looks like you got a bunch of repros from Gamereproductions. Hope you like the SOM2 label ;)
-
Looks like you got a bunch of repros from Gamereproductions. Hope you like the SOM2 label ;)
Yep, from there.
SoM 2, isn't the one Peach Waffles made (I thought so too at first), least not directly:
Production code is SNS-A3DE-USA, while on PW's it's, SNS-SD3-USA.
Text on the top of cart has been moved from side to middle.
NINTENDO text on front has "LICENSED BY" text added.
SQUARESOFT text has TM added.
Picture is cropped bit more on the sides.
-
Nope not by Peach Waffles. The label he uses for his SOM2 carts was made by me. Thats why I mentioned it lol. But I actually sent that one to him and gave him permission to use it for his site because he asked nicely over at the Digital Press forums if it was ok.
-
Hows this Mr. Arseen? I'll make a label too it just may take some time. School just started back up and i've been working on my portable.
Legend of Zelda - Parallel Worlds
(http://a.imageshack.us/img291/6179/zeldaparallelpre.jpg) (http://img291.imageshack.us/i/zeldaparallelpre.jpg/)
-
Thats a pretty bad ass cover. Any chance of a horizontal too?
-
Thats a pretty bad ass cover. Any chance of a horizontal too?
of coarse, I had a little bit of time to work on it today so I wasn't able to make the label or a horizantal version yet
-
Hows this Mr. Arseen? I'll make a label too it just may take some time. School just started back up and i've been working on my portable.
Nice one, that is actually nicer front image than what I was thinking!
How do I download that? It's not in your Boxnet, and clicking the image just gives the preview image.
Matching label could be nice, I probably would change the current label as it is not holding perfectly, or may be I will get replacement cart shell and keep the original in safe place.
-
Legend of Zelda Parallel Worlds
Horizontal
(http://a.imageshack.us/img413/9603/zeldaparallelhpre.jpg) (http://img413.imageshack.us/i/zeldaparallelhpre.jpg/)
Label (download from box.net not preview image)
(http://a.imageshack.us/img413/8695/legendofzeldaparallelwo.th.jpg) (http://img413.imageshack.us/i/legendofzeldaparallelwo.jpg/)
Download Horizontal, Vertical & Label from my box.net profile in my signature!
P.S. If "someone" would like to use this cover and/or label for their reproduction carts on "their site" then just ask me, ok? ;)
-
Check the links, no pics.
-
TURN YOUR LIGHTS ON
also is that a Steel Battalion controller?
-
Few update pictures
(http://img444.imageshack.us/img444/8610/kuva006.jpg)
(http://img80.imageshack.us/img80/3624/kuva004r.jpg)
And something I finally bought, no game yet thought
(http://img695.imageshack.us/img695/5295/kuva005xy.jpg)
TURN YOUR LIGHTS ON
Just did that
also is that a Steel Battalion controller?
Yep
-
Hey do you have any pictures as to how to fit NES, SNES, or N64 games inside the double wide DVD cases? Thanks!!!
-
Hey do you have any pictures as to how to fit NES, SNES, or N64 games inside the double wide DVD cases? Thanks!!!
I imagine you just... put them in. It's probably not a very snug fit.
-
Hey do you have any pictures as to how to fit NES, SNES, or N64 games inside the double wide DVD cases? Thanks!!!
I imagine you just... put them in. It's probably not a very snug fit.
Its not a snug fit at all. The solution is to cut out foam inserts for the inside of the case and around the game cart. It works if you are unable to get UGCs.
-
Bit more organized shelves, still missing many games ( the red box on floor contains 80 or so SNES games) and many are in my bedroom.
(http://img694.imageshack.us/img694/472/kuvac.jpg)
-
Your getting there!
-
Yeah, but see how ugly the uncased NES and SNES games look with white hand written name tags :'(
Hope someone makes the missing ones!
Or e-mail me a cover, may Air Fortress, hint hint ;D
-
very nice collection what is your goal?
-
very nice collection what is your goal?
Dunno.
Maybe what Pokemon mantra says ;)
-
Small update to my SNES shelves.
(http://www.mediafire.com/imgbnc.php/1184195587483ba489344cd2534ae10da348096c1deaa9cae33ed400b681b43f6g.jpg)
(http://www.mediafire.com/imgbnc.php/1082f4bf1ac029703ff9f624084b23d0f1f591093c873331d1921e95b72543406g.jpg)
(http://www.mediafire.com/imgbnc.php/8f4f038a3166c07bb9584d55ad13ad9cf8cd6b549a411c9b635a5ebe3fbb503b6g.jpg)
(http://www.mediafire.com/imgbnc.php/4229dbaf68475bef5ca106630b757f0cc155dc5968a41b194e4a544cb4ea62766g.jpg)
Will try to clean tne shelves and update pictures in few days
EDIT: Mediafire acting up again, here are direct DL links if someone wants to see:
http://www.mediafire.com/i/?o05vfl6ao0u2pff
http://www.mediafire.com/i/?710j7acla6y266a
http://www.mediafire.com/i/?nm1js5e7o1zwf8l
http://www.mediafire.com/i/?daeixvqjwdnq6vb
-
I think I'm having more fun just staring at the shelves going, "Oh! I have that game. That game was awesome. Huh, I haven't tried that game yet." The shelves are coming along quite nicely though, from what I see.
-
Shelves themselves are finished, altough I might add one more to the bottom.
Biggest inconvinience is the number of games yet to get cover.
I'll take photos of them when I get home.
-
>:( why are cybermorth, super burnout and atari karts uncovered? (http://img34.imageshack.us/img34/4097/sarcasticsmileyface1.png)
-
>:( why are cybermorth, super burnout and atari karts uncovered? (http://img34.imageshack.us/img34/4097/sarcasticsmileyface1.png)
I think I have printed those covers (least atari carts one I have) and simply forgot to put those in the cases.
Probably happened when I didn't have enough cases.
Same goes to Iron Soldier. :D
-
Arseen, I would be interested in knowing more about your shelves. Are they mounted to the wall with some kind of bracket? I have been wanting to do something similar to what you have set up there. It looks very nice BTW. Thanks, and I apologize if these questions have already been asked.
-
I used L-shaped metal list that is first scrrwed to wall:
(http://www.mediafire.com/imgbnc.php/f10ead7ab85d42b6cecf4f9e9db0b671e04f7046ea447435f099cc14a2cf81746g.jpg)
And then to the bottoms of the shelves:
(http://www.mediafire.com/imgbnc.php/9da4a67b88c2250c19a6577ba6ed8f21e494507166426274c6b3a7bb098bce936g.jpg)
The list comes in lenghts of 2 metres.
The shelves are mounted with two 90 cm pieces on the long side and 10cm piece on the short sides (one end mounted to the wall, other to blank of wood seen on the first picture).
-
Thanks for the pics Arseen. That looks like aluminum angle. I will check around to see what it costs here. It looks like it would support the shelves good.
-
That looks like aluminum angle.
Oh that's what it's called in English.
But, yes it's aluminun.
2mm thick.
It looks like it would support the shelves good.
It does easily if you support the shelves from 3 sides like I do. Well 2 sides is enough but it sags a bit.
Thanks for the pics Arseen.
No problem.
Glad I could help.
:D
-
Great job with the shelves! Collection looks great.
-
Great job with the shelves! Collection looks great.
Thanks.
I'm just printing new covers and re-arranging the shelves.
I'll post new pictures later today or tomorrow.
-
Man your collection makes me a bit jelly ;) I mean I have the Systems but you man you got the games :)I wish I could do shelving like that but I live in an apartment and well I dont think justin would like me much if I did that. lawl Looks nice though :)
-
Man your collection makes me a bit jelly ;) I mean I have the Systems but you man you got the games :)I wish I could do shelving like that but I live in an apartment and well I dont think justin would like me much if I did that. lawl Looks nice though :)
Thanks.
Not to make you jealous but all the images I've posted here only show half of my collection.
-
I bet. :) So yea that idea on using the dvd cases is turning out quite well. :) just realized I'm gunna have to order some more for my n64 games. Also trying to get some genesis hard cases for my master system and famicom games I'll have to show you when its all done :)
-
Can't wait. :D
It's always nice to see other collector's collections.
-
Clean and simple. Nice setup! I'm sure it makes finding what you want to play really easy too.
I'd love to get all my games into one, single shelving system, instead of being spread around on a bunch of different shelves :/
-
Hey there! I would like to know what you think of these ?
http://www.discatonce.se/se/art/dvd-fodral-8-skivor-svart-50-pack.php
As you said, UGC are hard to come by in europe... Not sure if these are the same as the ones you linked earlier, but do you think they would work ?
Intended for Pal snes, Ntsc snes, nes, n64 carts.
-
Look like the same I use for my NESgames.
For N64 and SNES gmes I prefer ones with manual holders, but those are more expensive.
Quess I'll too have to visit sweden and pick those up as they are cheaper than the ones I use.
Cruises from Finland are cheap.
-
Haha yeah so I heard...
Anyway I got the dimensions from the sites manager and they are as following:
Height 19 cm
Width 13,5 cm
Depth 2,6 cm
Those are the "outer" measures of the box.
Would they fit for UGC cover standards ?
-
Height is standart DVD, so it's 5 mm too tall.
That really doesn't matter that much, either stretch the height 5mm, or leave 5mm white stripe to the bottom (like I do) or leave to cover just as it is (the difference is 2.5mm on top and bottom, and it's not that noticeable).
The cases I use have 27.5mm spine, but actually the 26mm spine might be better.
------------------------------------
Oh and just noticed you PM, hope it doesn't matter that I answer publicly:
Cases are bit larger that UGCs, so the big NES, SNES and N64 (and Jaguar) manuals fit perfectly, UGC have trouble with them.
Why I use DVD cases instead of VHS cases, there are 2 reasons:
1: VHS cases too had trouble fitting the manuals (+ some DVD cases have holders for the manuals).
2: The match the other DVD game cases
3: DVD cases were easier to come by.
4: DVD cases were cheaper.
Later I figured one more:
5: DVD cases are found up to 36mm (or was even 48mm) thick, so if you're having trouble with fitting game + thick manual or specific game (NEO GEO games ?) , you can always buy thicker case.
And yes they fit NES, SNES and N64 games, as well as Super Gameboy, Jaguar games.
The thicker ones can fit Pro Action Replays and such also.
And sure I can take photo of the inside, but it's just like any DVD case, but thicker and has the disc holder also inside the front cover.
Currently I'm not using anything to hold the games in place.
-
Alright! Thanks alot man :)
Will dust off my printer, get some new ink and paper .. oh btw do you use photo paper ? ;D
-
Alright! Thanks alot man :)
Will dust off my printer, get some new ink and paper .. oh btw do you use photo paper ? ;D
HP semiglosse everyday photo paper in A4 size printed with 5 mm margins.
The imega in the front seem to have changed, but it should be this:
http://www.prisjakt.nu/produkt.php?p=390516
another package:
http://www.amazon.co.uk/HP-Everyday-Photo-paper-210x297mm/dp/B00014SKOI
-
Would love to see some updated pics of your collection man. Also how many games do you have ?
-
I'll try to clean organize my game room when I have next holiday starting March 12th.
I'll take new photos afer that.
How many games I have?
Don't know, questimate: 2000-2500, if counting duplicates.
-
(http://img815.imageshack.us/img815/8634/img0840p.jpg)
(http://img215.imageshack.us/img215/3880/img0841vp.jpg)
-
Back with a vengeance!
-
Damn.....that is sexy as all hell!
;)
-
Dare I ask why you have 35 copes of champios of Europe on megadrive? ??? ::) lol
-
Dare I ask why you have 35 copes of champios of Europe on megadrive? ??? ::) lol
Huge football fan.
ActuallyI needed the cases (these are flawless and brand new).
The add even said Brand new cases, each case comes with this game and manual (so not game comes in brand new case).
I yhink thje cases were £1 each, £2 maximum.
-
In which case, that was a damn good find. I would do with a stash of megadrive cases.
Was thinking there would have to be a better reason than the actual game - as, if I remember correctly, it's not great! ;D
-
What was the dimensions of the boards you purchased for these and where did you buy them? Thinking about 86ing my book shelves and doing something similar to this to conserve room.
-
The room is 276cm high and shelves 240 cm wide (about 9 feet high and 8 feet wide)
Custom order at local lumberyard.
-
Height is standart DVD, so it's 5 mm too tall.
That really doesn't matter that much, either stretch the height 5mm, or leave 5mm white stripe to the bottom (like I do) or leave to cover just as it is (the difference is 2.5mm on top and bottom, and it's not that noticeable).
The cases I use have 27.5mm spine, but actually the 26mm spine might be better.
------------------------------------
Oh and just noticed you PM, hope it doesn't matter that I answer publicly:
Cases are bit larger that UGCs, so the big NES, SNES and N64 (and Jaguar) manuals fit perfectly, UGC have trouble with them.
Why I use DVD cases instead of VHS cases, there are 2 reasons:
1: VHS cases too had trouble fitting the manuals (+ some DVD cases have holders for the manuals).
2: The match the other DVD game cases
3: DVD cases were easier to come by.
4: DVD cases were cheaper.
Later I figured one more:
5: DVD cases are found up to 36mm (or was even 48mm) thick, so if you're having trouble with fitting game + thick manual or specific game (NEO GEO games ?) , you can always buy thicker case.
And yes they fit NES, SNES and N64 games, as well as Super Gameboy, Jaguar games.
The thicker ones can fit Pro Action Replays and such also.
And sure I can take photo of the inside, but it's just like any DVD case, but thicker and has the disc holder also inside the front cover.
Currently I'm not using anything to hold the games in place.
You're still using DVD cases for the Super Gameboy and Pro Action Replay? :)
OP needs pics again!