The Cover Project
Archive => The Old Request Forum => Topic started by: dmc1974 on June 09, 2008, 11:20:33 AM
-
I dont know if anybody has one or could make a PS2 cover for a UGC. I want to make a case for my PS2 DVD remote, and I dont think it will fit in a empty DVD case. Any thoughts or suggestions would be helpful.
-
I dont know if anybody has one or could make a PS2 cover for a UGC. I want to make a case for my PS2 DVD remote, and I dont think it will fit in a empty DVD case. Any thoughts or suggestions would be helpful.
this may sound weird, scan in your ps2 dvd remote.
are you american or european?
-
American. You mean just set my remote on the scanner and upload the picture?
-
American. You mean just set my remote on the scanner and upload the picture?
yeah, that way we have something to work with.
The pictures i searched through on the net are all really low rez.
-
OK, I'll try it when I get home from work later.
Thanks
-
Its not going to work, too dark. What about a pic with a digital camera?
-
Its not going to work, too dark. What about a pic with a digital camera?
It's possibly too dark becasue there is a lot of light comming on from the sides. Try covering your scanner with a thick jaket or blanket to block out any light from comming in.
-
Its not going to work, too dark. What about a pic with a digital camera?
It's possibly too dark becasue there is a lot of light comming on from the sides. Try covering your scanner with a thick jaket or blanket to block out any light from comming in.
I used a pillow and the only thing that shows up are the Triangle, square, o and x buttons
-
i have an idea, take the pic with the camera.
I'll use a "vector effect" that might work for the cover.
-
I uploaded a pic in the raws. I dont know if you can do anything with it or not. Thats the best one with the flash, without you can hardly see anything.